#Usb isolator thermocouples drivers#
#Usb isolator thermocouples full#
#Usb isolator thermocouples Pc#

Wire range: AWG #14-28 solid or stranded. I/O Connectors: Barrier strip type, captive screw terminals. USB dust cap material is Santoprene, 251-70W232. General General purpose enclosure with potted circuit designed for mounting in DIN Form B connection heads.Ĭase Material: Self-extinguishing polycarbonate ABS plastic, UL94 V-0 rated base material. ATEX Certified.ĭesigned for Class I Division 2 Groups ABCD Zone 2. 250V AC (354V DC) continuous isolation between input and output circuits.Įlectromagnetic Compatibility (EMC) Compliance Power Requirement: 12-32V DC SELV (Safety Extra Low Voltage), 24mA max. Relative humidity: 5 to 95% non-condensing. Time to reach 98% of final output value (typical) Output Response Time (for step input change) Noise Rejection (Normal Mode): 75dB 60Hz, typical with 100 ohm input unbalance. Input Filter: Normal mode filtering, plus selectable digital filtering settings (none, low, medium, high) optimized and fixed per input range within the A/D converter. Input Over-Voltage Protection: Bipolar Transient Voltage Suppressers (TVS), 5.6V clamp level typical. Thermocouple Input Bias Current: ☒50nA typical (TC break). Lead Break (Sensor Burnout) Detection: Configurable for either upscale (24mA) or downscale (3.3mA) operation.

#Usb isolator thermocouples full#

Zero Scaling Adjust: 0 to 95% of range, typical.įull Scale Adjust: 5 to 100% of full scale range, typical. Thermocouple Reference (Cold Junction Compensation) ☐.1☌ typical, ☐.3☌ maximum at 25☌.Īmbient Temperature Effect: Better than ☗5ppm/☌ (☐.0075%/☌). TC N -230 to 1300☌ (-382 to 2372☏) ☑.0☌Įrror includes the effects of repeatability, terminal point conformity, and linearization at 25☌ operating ambient temperature. Input: TC J, -210 to 760☌, upscale fault, high filter.

#Usb isolator thermocouples drivers#

Uses built-in Human Interface Device (HID) USB drivers of the Windows operating system. USB Transient Protection: Transient voltage suppression on power and data lines.ĭriver: Not required. USB Connector: USB Mini-B type socket, 5-pin. They feature RFI, EMI, ESD, EFT, and surge protection plus low radiated emissions. These transmitters can withstand harsh industrial environments and operate reliably across a wide temperature range with very low drift.

#Usb isolator thermocouples Pc#

Setup and calibration are fast and easy with a convenient USB connection to your PC and Acromag’s Windows configuration software.Īdvanced signal processing capabilities, variable range input, and convenient USB programming make this instrument a very versatile temperature measurement device. Isolation protects from surges, reduces noise, and eliminates ground loop errors. High-voltage isolation separates the input from the output circuit. The transmitter performs signal linearization, cold-junction compensation, and lead-break detection functions.

Power is received from the output loop current. The ST133 is a low-cost two-wire transmitter that isolates and converts a millivolt or thermocouple sensor input to a proportional 4-20mA control signal. ST133: Isolated Transmitter Thermocouple/mV Input Head-Mount Transmitter Description